Struct futures_util::stream::TryFlatten

impl<St> TryFlatten<St>where
 St: TryStream,
 St::Ok: TryStream,
 <St::Ok as TryStream>::Error: From<St::Error>,

pub fn get_ref(&self) -> &St

Acquires a reference to the underlying sink or stream that this combinator is pulling from.

pub fn get_mut(&mut self) -> &mut St

Acquires a mutable reference to the underlying sink or stream that this combinator is pulling from.

Note that care must be taken to avoid tampering with the state of the sink or stream which may otherwise confuse this combinator.

pub fn get_pin_mut(self: Pin<&mut Self>) -> Pin<&mut St>

Acquires a pinned mutable reference to the underlying sink or stream that this combinator is pulling from.

Note that care must be taken to avoid tampering with the state of the sink or stream which may otherwise confuse this combinator.

pub fn into_inner(self) -> St

Consumes this combinator, returning the underlying sink or stream.

Note that this may discard intermediate state of this combinator, so care should be taken to avoid losing resources when this is called.

Trait Implementations§

impl<St> Debug for TryFlatten<St>where
St: TryStream + Debug,
St::Ok: Debug,

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl<St> FusedStream for TryFlatten<St>where
 St: TryStream + FusedStream,
 St::Ok: TryStream,
 <St::Ok as TryStream>::Error: From<St::Error>,

fn is_terminated(&self) -> bool

Returns true if the stream should no longer be polled.

impl<S, Item> Sink<Item> for TryFlatten<S>where
S: TryStream + Sink<Item>,

type Error = <S as Sink<Item>>::Error

The type of value produced by the sink when an error occurs.

fn poll_ready(
self: Pin<&mut Self>,
cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>>

Attempts to prepare the Sink to receive a value. Read more

fn start_send(self: Pin<&mut Self>, item: Item) -> Result<(), Self::Error>

Begin the process of sending a value to the sink. Each call to this function must be preceded by a successful call to poll_ready which returned Poll::Ready(Ok(())). Read more

fn poll_flush(
self: Pin<&mut Self>,
cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>>

Flush any remaining output from this sink. Read more

fn poll_close(
self: Pin<&mut Self>,
cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>>

Flush any remaining output and close this sink, if necessary. Read more

impl<St> Stream for TryFlatten<St>where
 St: TryStream,
 St::Ok: TryStream,
 <St::Ok as TryStream>::Error: From<St::Error>,

type Item = Result<<<St as TryStream>::Ok as TryStream>::Ok, <<St as TryStream>::Ok as TryStream>::Error>

Values yielded by the stream.

fn poll_next(
self: Pin<&mut Self>,
cx: &mut Context<'_>
) -> Poll<Option<Self::Item>>

Attempt to pull out the next value of this stream, registering the current task for wakeup if the value is not yet available, and returning None if the stream is exhausted. Read more

fn size_hint(&self) -> (usize, Option<usize>)

Returns the bounds on the remaining length of the stream. Read more

impl<'pin, St> Unpin for TryFlatten<St>where
Origin<'__pin, St>: Unpin,
St: TryStream,

Auto Trait Implementations§

impl<St> RefUnwindSafe for TryFlatten<St>where
St: RefUnwindSafe,
<St as TryStream>::Ok: RefUnwindSafe,

impl<St> Send for TryFlatten<St>where
St: Send,
<St as TryStream>::Ok: Send,

impl<St> Sync for TryFlatten<St>where
St: Sync,
<St as TryStream>::Ok: Sync,

impl<St> UnwindSafe for TryFlatten<St>where
St: UnwindSafe,
<St as TryStream>::Ok: UnwindSafe,

Blanket Implementations§

impl<T> Any for Twhere
T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for Twhere
T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into for Twhere
U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T, Item> SinkExt<Item> for Twhere
T: Sink<Item> + ?Sized,

fn with<U, Fut, F, E>(self, f: F) -> With<Self, Item, U, Fut, F>where
 F: FnMut(U) -> Fut,
 Fut: Future<Output = Result<Item, E>>,
 E: From<Self::Error>,
 Self: Sized,

Composes a function in front of the sink. Read more

fn with_flat_map<U, St, F>(self, f: F) -> WithFlatMap<Self, Item, U, St, F>where
 F: FnMut(U) -> St,
 St: Stream<Item = Result<Item, Self::Error>>,
 Self: Sized,

Composes a function in front of the sink. Read more

fn sink_map_err<E, F>(self, f: F) -> SinkMapErr<Self, F>where
F: FnOnce(Self::Error) -> E,
Self: Sized,

Transforms the error returned by the sink.

fn sink_err_into<E>(self) -> SinkErrInto<Self, Item, E>where
Self: Sized,
Self::Error: Into<E>,

Map this sink’s error to a different error type using the Into trait. Read more

fn buffer(self, capacity: usize) -> Buffer<Self, Item>where
Self: Sized,

Adds a fixed-size buffer to the current sink. Read more

fn close(&mut self) -> Close<'_, Self, Item> ⓘwhere
Self: Unpin,

Close the sink.

fn fanout<Si>(self, other: Si) -> Fanout<Self, Si>where
 Self: Sized,
 Item: Clone,
 Si: Sink<Item, Error = Self::Error>,

Fanout items to multiple sinks. Read more

fn flush(&mut self) -> Flush<'_, Self, Item> ⓘwhere
Self: Unpin,

Flush the sink, processing all pending items. Read more

fn send(&mut self, item: Item) -> Send<'_, Self, Item> ⓘwhere
Self: Unpin,

A future that completes after the given item has been fully processed into the sink, including flushing. Read more

fn feed(&mut self, item: Item) -> Feed<'_, Self, Item> ⓘwhere
Self: Unpin,

A future that completes after the given item has been received by the sink. Read more

fn send_all<'a, St>(&'a mut self, stream: &'a mut St) -> SendAll<'a, Self, St> ⓘwhere
St: TryStream<Ok = Item, Error = Self::Error> + Stream + Unpin + ?Sized,
Self: Unpin,

A future that completes after the given stream has been fully processed into the sink, including flushing. Read more

fn left_sink<Si2>(self) -> Either<Self, Si2> ⓘwhere
Si2: Sink<Item, Error = Self::Error>,
Self: Sized,

Wrap this sink in an Either sink, making it the left-hand variant of that Either. Read more

fn right_sink<Si1>(self) -> Either<Si1, Self> ⓘwhere
Si1: Sink<Item, Error = Self::Error>,
Self: Sized,

Wrap this stream in an Either stream, making it the right-hand variant of that Either. Read more

fn poll_ready_unpin(
 &mut self,
 cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>>where
 Self: Unpin,

A convenience method for calling Sink::poll_ready on Unpin sink types.

fn start_send_unpin(&mut self, item: Item) -> Result<(), Self::Error>where
Self: Unpin,

A convenience method for calling Sink::start_send on Unpin sink types.

fn poll_flush_unpin(
 &mut self,
 cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>>where
 Self: Unpin,

A convenience method for calling Sink::poll_flush on Unpin sink types.

fn poll_close_unpin(
 &mut self,
 cx: &mut Context<'_>
) -> Poll<Result<(), Self::Error>>where
 Self: Unpin,

A convenience method for calling Sink::poll_close on Unpin sink types.

impl<T, U> TryFrom for Twhere
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for Twhere
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source§

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

impl<S, T, E> TryStream for Swhere
S: Stream<Item = Result<T, E>> + ?Sized,

type Ok = T

The type of successful values yielded by this future

type Error = E

The type of failures yielded by this future